Prs-650 System Update For Mac

• Prs-650 System Update For Mac

Important Notes. IMPORTANT: This utility is for Apple Mac OS X® 10.4.11 or later operating systems only. If you are using a computer with a Microsoft® Windows® operating system please go to the page.

WARNING: The Sony Reader must be fully charged before installing this update. Failure to fully charge the Reader before installing the firmware update may cause the Reader to be unresponsive or to require repair. The software update process takes about 1 to 2 minutes. During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.

This update is only for PRS-650 Readers, do not attempt to install it on any other device. To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding. It is highly recommended to print out these instructions as a reference during the installation process. Download and Installation Instructions. WARNING: The Sony Reader must be fully charged before installing this update. Failure to fully charge the Reader before installing the firmware update may cause the Reader to be unresponsive or to require repair.

Jul 23, 2011 - I just upgraded to Mac OS X Lion and while the Library Software is still working, the connected PRS-650 shows up with an Error label next to it.

To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding. Download the PRS-650Updater.dmg file to a temporary or download directory (please note this directory for reference). Connect the Sony Reader to the computer with the supplied USB cable.

If the Reader Library software starts, close Reader Library before continuing. Go to the directory where the file was downloaded and double-click the PRS-650Updater.dmg file to begin the installation. Note: The Sony Reader will automatically restart during the update process. After the software update is complete, an Update Completed message is displayed. Click the X to close the update utility.

After the Sony Reader restarts, and the Reader displays an update complete message, the installation of the Sony Reader (PRS-650) Update is complete. Installation Verification (optional). On the Sony Reader, press and hold the Home button until the Home menu opens.

At the Home menu, tap Settings. At the Settings menu, tap About. At the About screen, version 1.0.00.14080 should be displayed. Possible Errors During the Update Process ERROR: The message Please first quit Reader Library and try again. Is displayed. RESOLUTION:.

Prs-650 System Update For Mac

Close the Reader Library software. Click the X in the upper right hand corner to close the PRS-650 updater window. Disconnect the USB cable from the PRS-650. Start the update process again. ERROR: The message Update isn't complete.

Please try again is displayed. RESOLUTION:.

Click the X in the upper right hand corner to close the PRS-650 updater window. Disconnect the USB cable from the PRS-650. Start the update process again. ERROR: The Update button in the PRS-650 Updater is not enabled even if the PRS-650 is connected to the computer. RESOLUTION:. Click the X in the upper right hand corner to close the PRS-650 updater window. Disconnect the USB cable from the Reader.

Press the Reset button on the Reader, and then press the Power button to restart the Reader. Start the update process again.